Presetting Stations - Yamaha RX-V4600 Bedienungsanleitung

TUNING

Presetting stations

■ Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune into FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
AUDIO MULTI CH
SELECT INPUT A/B/C/D/E
INPUT
SPEAKERS
SOURCE/
REMOTE
DVD MD/TAPE
CD-R
DTV
A B
CBL/SAT TUNER
STANDBY VCR 1 CD SILENT CINEMA
/ON
DVR/
VCR 2
REC OUT/ZONE 2 OPTIMIZER
MIC PHONES
1
Press FM/AM to select the FM band.
FM/AM
2
Press TUNING MODE (AUTO/MAN'L) so that
the AUTO indicator lights up on the front
panel display.
TUNING
MODE
AUTO/MAN'L
3
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
V-AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
A1:FM 87.50MHz
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
42
PURE DIRECT
VOLUME
PRESET/ PRESET/ TUNING TONE
TUNING TUNING FM/AM MEMORY MODE STRAIGHT CONTROL
MAN'L/AUTO FM AUTO/MAN'L
EDIT EFFECT
ZONE ON/OFF ZONE CONTROL
PROGRAM
MAIN ZONE 2 ZONE 3
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO/AUX
1 3 2
AUTO
Lights up
MEMORY
MAN'L/AUTO FM
DTV DVD MD/TAPE CD-R CD TUNER
AUTO
MEMORY
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in "Manually presetting
stations".
Automatic preset tuning options
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cable is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared.
If so, store the stations again by using the presetting
station methods.
PHONO
dB
VOLUME
L R