Werbung
Stop Pressure Washer
1. Release spray gun trigger and let engine idle for two minutes.
2. Push engine switch to OFF (0) position.
3. ALWAYS point spray gun in safe direction, press red
button and squeeze spray gun trigger to release high
pressure, every time you stop engine.
WARNING! Spray gun traps high water pressure,
even when engine is stopped and water is
disconnected, which could result in serious injury.
Keep high pressure hose connected to pump and spray gun
while system is pressurized. ALWAYS point spray gun in
safe direction, press red button and squeeze spray gun
trigger to release high pressure, every time you stop engine.
After Each Use
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and freeze
pump action. Follow these procedures after every use:
1. Turn off water supply, and let engine cool.
2. Disconnect hose from gun and outlet on pump. Drain
water from hose, gun, and nozzle extension.
3. Place gun, nozzle extension, nozzle and hose on
accessory tray.
4. Empty pump of all liquids by pulling recoil handle
about six times.
5. Store unit in a clean, dry area.
NOTICE If storing for more than 30 days, see Storage.
WARNING! Fuel and its vapors are
extremely flammable and explosive which
could cause burns, fire or explosion resulting
in death or serious injury. When storing fuel or equipment with
fuel in tank, store away from furnaces, stoves, water heaters,
clothes dryers, or other appliances that have pilot light or
other ignition source because they could ignite fuel vapors.
8
Maintenance
Maintenance Schedule
Follow hourly or calendar intervals, whichever occurs first. More
frequent service is required when operating in adverse conditions.
First 5 Hours
• Change engine oil
Every 8 Hours or Daily
• Clean debris
• Check engine oil level
Every 50 Hours or Yearly
• Clean engine air cleaner
• Change engine oil
1
• Inspect muffler
Every 200 Hours or Yearly
• Replace engine air cleaner
Yearly
• Replace spark plug
• Clean cooling system
Service more often under dirty or dusty conditions.
1
General Recommendations
Regular maintenance will improve performance and extend
the life of the pressure washer. See any Briggs & Stratton
Authorized Service Dealer for service. DO NOT allow
children to clean or maintain without supervision.
NOTICE Your pressure washer was designed and
intended to be used with POWERflow+ components ONLY.
Using components that are not designed for POWERflow+
will cause your pressure washer to not function optimally.
WARNING! To ensure machine safety, use only
original spare parts from the manufacturer or approved by
the manufacturer. Should you have questions about
replacing components on your pressure washer, please
visit our website at BRIGGSandSTRATTON.COM.
1
1
1
BRIGGSandSTRATTON.COM
Werbung
Kapitel
Fehlerbehebung
