Making The Line Busy Temporarily; Disconnecting The Line; Chapter 3 Operation 3-3 (Gb) - Sony PMS-500P Bedienungsanleitung

Making the Line Busy Temporarily

You can temporarily disable the line so that when a
remote site calls, the system does not accept the call.
Select BUSY from the main menu.
The following screen appears and the line is disabled.
N O W B U S Y. . .
To enable the line
Press any key on the Monitoring Codec or Remote
Commander.
The initial setting screen appears and soon the DIAL
LIST menu appears.
Note
This function may not work properly depending on
types of ISDN networks.

Disconnecting the Line

1
Select DIAL DISC from the main menu.
The following screen appears.
D I S C O N N E C T
< C A N C E L > < O K >
2
Move the cursor to <OK>, then press ENTER.
The line disconnects.
To cancel the operation
Move the cursor to <CANCEL> and press ENTER.
The operation is canceled and the main menu appears.
3-3
Chapter 3 Operation (GB)