Appendix; Location And Function Of Controls; Monitoring Codec - Sony PMS-500P Bedienungsanleitung

Location and Function of Controls

Monitoring Codec

Front
1 POWER lamp
2 POWER switch
POWER
1 POWER lamp
Lights up green when the Monitoring Codec is turned
on by pressing the POWER switch 2.
2 POWER switch
Turns on the Monitoring Codec.

Appendix

3 STANDBY lamp
Lights up red when the Monitoring Codec is in the
standby mode.
4 ON LINE lamp
Lights up green when a remote site is connected.
3 STANDBY lamp
4 ON LINE lamp
5 Cursor keys
STANDBY
ON LINE
ENTER
6 ENTER key
7 Remote sensor
Appendix
A-1
(GB)