Items In The Main Menu; Remote Alarm - Sony PMS-500P Bedienungsanleitung

Using the Menu

Items in the Main Menu

The main menu items are listed below.
When you turn off the Monitoring Codec, all data are
reset except for the items in the SETTING menu.
Item
MENU OFF Clears the main menu.
DIAL LIST Connects to a registered remote site.
KEY Connects to an unregistered remote site.
BUSY Makes the line busy temporarily.
DISC Disconnects the line.
SETTING Sets preferences.
LOCAL ALARM Verifies alarm signals and log file input into the local ALARM IN port and communication log. 3-4 (GB)
CAM SEL Switches the picture of the camera connected to the local site.
CAM CTR Controls the camera controller connected to the local site.
P I/O Sets the bit value of the local RELAY OUT port.
HEADSET Mutes the headset volume.
MIC Mutes the microphone input.
a)
PinP Changes the position of the inset window.
a)
4CIF Sends one still image.

REMOTE ALARM

Verifies alarm signals and log file input into the remote ALARM IN port and communication log. 3-4 (GB)
CAM SEL a) Switches the picture of a camera connected to the remote site.
CAM CTR a) Controls the camera controller connected to the remote site.
P I/O Sets the bit value of the remote RELAY OUT port.
A-RESET Resets the operations of the remote site when an alarm is input.
PICTURE a) Selects the picture quality sent from the remote site.
4CIF a) Receives one still image.
a)
4CIF... Receives a sequence of still images.
CALLBACK Makes the remote site call the first number registered in the DIAL LIST of the remote site.
a) Only for PMS-500P
1-8
(GB) Chapter 1 Preparation
For details on items in the SETTING menu, see "Items in
the SETTING Menu" on pages 2-1 (GB) and 2-2 (GB).
Page
1-9 (GB)
3-1 (GB)
3-2 (GB)
3-3 (GB)
3-3 (GB)
Chapter 2
3-5 (GB)
3-5 (GB)
3-6 (GB)
3-7 (GB)
3-7 (GB)
3-7 (GB)
3-7 (GB)
3-5 (GB)
3-5 (GB)
3-6 (GB)
3-6 (GB)
3-6 (GB)
3-6 (GB)
3-6 (GB)
3-7 (GB)