Timer Calendar Menu; Timer; Calendar; Daylight Saving - Sony PMS-500P Bedienungsanleitung

TIMER CALENDAR Menu

You can set the timer and calendar in this screen.
T I M E R C A L E N D A R
T I M E R
C A L E N D A R
< E X I T > < O K >

TIMER

T I M E R
O F F L I N E
M I N : [ 0. . . . . .] S E C : [ 0. . .]
S T A N D B Y
M I N : [ 0. . . . . .] S E C : [ 0. . .]
D I A L
M I N : [ 3. . . . . .] S E C : [ 0. . .]
R E D I A L
M I N : [ 3. . . . . .] S E C : [ 0. . .]
0 1 2 3 4 5 6 7 8 9 BS
< C A N C E L > < O K >
OFFLINE: Set the time to automatically disconnect
the line.
STANDBY: Set the time to automatically change to
the standby mode.
DIAL: Set the time to continue calling if the remote
site does not respond.
REDIAL: Set the redial time.
Notes
• If you select 0 for minutes and seconds, the timers do
not function.
• When the PRE/POST ALARM REC KIND in the
ALARM menu is set to PRE-ALARM or POST
ALARM, STANDBY is disabled. This means there is
no standby mode.
To turn on the power from the standby
mode
Press any key on the Monitoring Codec or Remote
Commander.

CALENDAR

You can set the date and time in this screen. You can
also adjust the time to Daylight Savings by setting the
beginning and ending date and time.
C A L E N D A R
Y Y . M M . D D H H : M M : S S
[ 9 9 . 0 1 . 0 1 1 0 : 1 0 : 1 0 ] [ S U N ]
B b
0 1 2 3 4 5 6 7 8 9
D A Y L I G H T S A V I N G : O F F
W E E K M O N T H T I M E
S T A R T : 1 S T - S U N [ 0 4 ] [ 0 2 : 0 0 ]
E N D : 1 S T - S U N [ 1 0 ] [ 0 2 : 0 0 ]
0 1 2 3 4 5 6 7 8 9 BS
< C A N C E L > < O K >
If you set all the date and time items, go to Step 2.
1
To select the date or time item you want to set,
move the cursor to B or b using the B or b key.
Pressing ENTER move the cursor among the date
(YY.MM.DD) and time (HH:MM:SS) cyclically.
YY MM DD
Year Month Date
2
Select a number using B or b, then press ENTER.
The selected number is entered in the box and the
cursor moves to the right.
3
Repeat Steps 1 and 2 to enter the date and time.
4
Move the cursor to DAY using v. Set the day of
the week using B, b or ENTER. To set the day of
the week back, use B, to set the day of the week
forward, use b or ENTER.
5
After entering the date, time and the day of the
week, move the cursor to <OK> using V or v, then
press ENTER.
The date and time are set.
DAYLIGHT SAVING: Set ON if you use the
Daylight Saving function.
START: Set the beginning date and time for
Daylight Savings. This item is available when you
have set ON in DAYLIGHT SAVING. Set
WEEK, MONTH, and TIME. Use V or v to move
the cursor to the item to be set.
Chapter 2 Setup Using the SETTING Menu
D A Y
HH MM SS
Hour Minute Second
2-15
(GB)