Kdn 100 - 200 / 198 / A W / Baqe / 1 / 5,5; Kdn 100 - 200 / 198 / / / 1 / 5,5 - DAB KDN 32-125.1 Anleitungen Für Installation Und Wartung

CONTENTS
1. GENERAL
1.1. Pump description
2. APPLICATIONS
3. PUMPED FLUIDS
4. TECHNICAL DATA AND RANGE OF USE
5. MANAGEMENT
5.1. Storage
5.2. Transport
5.3. Dimensions and weights
6. WARNINGS
6.1. Checking motor shaft rotation
6.2. New systems
6.3. Responsibility
6.4. Protections
6.4.1 Moving parts
6.4.2 Noise level
6.4.3 Hot and cold parts
7. INSTALLATION
8. ELECTRICAL CONNECTION
9. STARTING UP
10. STOPPING
11. PRECAUTIONS
12. MAINTENANCE AND CLEANING
12.1 Periodic checks
12.2 Greasing the bearings
12.3 Shaft seal
12.3.1 Stuffing box seal
12.3.2 Mechanical seal
12.4. Changing the seal
12.4.1 Preparing disassembly
12.4.2 Changing the mechanical seal
12.4.3 Changing the stuffing box seal
13. MODIFICATIONS AND SPARE PARTS
14. TROUBLESHOOTING
1. GENERAL
The pump may be installed in either horizontal or vertical position, as long as the motor is always above the pump.
The supply may be made in one of the following configurations:
- KDN Standardized Pumps with a bare axis (without motor);
- KDN Standardized Electropumps on a base complete with electric motor (to be chosen to suit the fluid that is to be
pumped), coupling, base and coupling cover, all preassembled.
1.1. Pump description (example):
Example:
Type range:
Nominal diameter of discharge port:
Nominal impeller diameter:
Actual Impeller diameter:
Code for materials:
A (01): Cast iron
B (03): Cast iron with bronze impeller
Wear rings (only when there is)
Code for shaft seal:
Coupling type:
0 = without coupling
1 = with coupling without spacer
2 = with coupling and spacer
Motor power in kW
Voltage and poles of motor
ENGLISH
KDN 100 - 200 / 198
18
/ A W / BAQE / 1
page
18
18
19
19
19
19
19
19
19
19
19
19
20
20
20
20
20
20
22
22
22
22
23
23
23
23
23
23
23
23
24
24
24
24
/ 5,5 / 4