Ec Declaration Of Conformity - Optimum OPTImill MH 25 SV Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y

EC Declaration of Conformity

Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
distributor:
hereby declares that the following product
Product designation:
Type designation:
Serial number:
Year of manufacture:
Manual milling machine with frequency converter for speed control and digital position display for handcraft
and industrial plants which meets all the relevant provisions of the above-mentioned Directive 2006/42/EC
as well as the other directives applied (below) including their amendments in force at the time of declara-
tion. The following additional EU Directives have been applied: EMC Directive 2014/30/EC, Low Voltage
Directive 2014/35/EC The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN ISO 14119 Safety of machinery - Interlocking devices associated with guards - Principles for design and
selection
EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines (including boring machines)
EN 61800-3: Adjustable speed electrical power drive systems - part 3: EMC product standard including
specific test methods.
EN 61800-5-1 Adjustable speed electrical power drive systems 2008-04 + correction 2
EN 61800-3:2012-09 Adjustable speed electrical power drive systems + correction 1
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
EN 60204-1:2014 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 12100:2010 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
Responsible for documentation: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, General manager)
GB MH25SV
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Milling machine
MH25SV
_ __ __ __ __
20__
Dr.-Robert-Pfleger-Str. 26, D - 96103 Hallstadt
Hallstadt, 2015-04-08
Original operating instructions