Ec Declaration Of Conformity - Optimum OPTidrill DH 40CT Betriebsanleitung

EC - Declaration of Conformity
according to Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
distributor:
hereby declares that the following product
Product designation:
Type designation:
Manual drilling milling machine for private persons, as well as for craft and industrial plants which meets all
the relevant provisions of the above mentioned Directive 2006/42/EC as well as the other directives applied
(below) including their amendments in force at the time of declaration. The following additional EU
directives have been applied: EMC Directive 2014/30/EU ; Restriction of the use of certain hazardous
substances in electrical and electronic equipment 2015/863/EU.
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 13128:2001+A2:2009/AC:2010 - Safety of machine tools - Milling machines (including drilling milling
machines)
EN 60204-1:2019-06 -Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN ISO 12100:2010Safety of machinery - General principles for design - Risk assessment and risk
reduction
Documentation Manager: Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, General Manager)
Hallstadt, 2021-07-06
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Drilling and milling machine
DH40CT
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany