Herunterladen Inhalt Inhalt Diese Seite drucken

Liability Claims/Warranty - Optimum OPTImill MB 4 Betriebsanleitung

Bohr- fräsmaschine
Vorschau ausblenden Andere Handbücher für OPTImill MB 4:
Inhaltsverzeichnis

Werbung

7.3

Liability claims/warranty

Besides the legal liability claims for defects of the customer towards the seller, the manufac-
turer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not
grant any further warranties unless they are listed below or were promised as part of a single
contractual provision.
Liability or warranty claims are processed at OPTIMUM GmbH's discretion either directly or
through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by
components which are free from defects. Ownership of replaced products or components is
transferred to OPTIMUM Maschinen Germany GmbH.
The automatically generated original proof of purchase which shows the date of purchase, the
type of machine and the serial number, if applicable, is the precondition in order to assert liabil-
ity or warranty claims. If the original proof of purchase is not presented, we are not able to per-
form any services.
Defects resulting from the following circumstances are excluded from liability and warranty
claims:
Using the product beyond the technical options and proper use, in particular due to over-
straining of the machine.
Damage caused personally through incorrect use or failure to observe our operating
instructions,
negligent or incorrect handling and use of improper operating materials.
Unauthorized modifications and repairs.
Insufficient installation and safeguarding of the machine.
Disregarding the installation requirements and conditions of use.
Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences.
The following items are also not subject to liability or warranty claims:
Wearing parts and components which are subject to a standard wear as intended such as
e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
Non reproducible software errors
Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any addi-
tional warranty are neither an acceptance of the defects nor an acceptance of its obligation to
compensate. These services neither delay nor interrupt the warranty period.
The court of jurisdiction for legal disputes between businessmen is Bamberg.
If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a provi-
sion which nearest approaches the intent of the guarantor and remains within the framework of
the limits of liability and warranty which are specified by this contract is deemed agreed.
EN
MB4
82
Translation of original instruction
Version 1.0.1 - 2021-11-18

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

333845133384512

Inhaltsverzeichnis