Liability Claims For Defects / Warranty; Advice For Disposal / Options Of Reuse - Optimum OPTImill MH 25 SV Betriebsanleitung

8.4

Liability claims for defects / warranty

Besides the legal liability claims for defects submitted by the customer to the seller, the manu-
facturer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, grants
no further warranties unless they are listed below or were promised in the framework of a single
contractual provision.
The processing of the liability claims or of the warranty is performed as chosen by OPTIMUM
GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by
components which are free from defects. Ownership of replaced products or components is
transferred to OPTIMUM Maschinen Germany GmbH.
The automatically generated original proof of purchase which shows the date of purchase, the
type of machine and the serial number, if applicable, is the precondition in order to assert liabil-
ity or warranty claims. If the original proof of purchase is not presented, we are not able to per-
form any services.
Defects resulting from the following circumstances are excluded from liability and warranty
claims:
Using the product beyond the technical options and proper use, in particular due to over-

straining of the machine.
Any defects arising due to one's own fault due to faulty operations or if the operating man-

ual is disregarded,
Inattentive or incorrect handling and use of improper equipment

Unauthorized modifications and repairs

Insufficient installation and safeguarding of the machine

Disregarding the installation requirements and conditions of use

Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences

The following items are also not subject to liability or warranty claims:
Wearing parts and components which are subjected to normal or expected wear, e.g. V-

belts, ball bearings, illuminants, filters, sealings, etc.
Non reproducible software errors

Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any addi-
tional warranty are neither an acceptance of the defects nor an acceptance of its obligation to
compensate. Such services neither delay nor interrupt the warranty period.
The place of jurisdiction for legal disputes between businessmen is Bamberg.
If one of the aforementioned agreements is totally or partially inoperative and/or invalid, a provi-
sion closest to the intent of the warrantor is considered agreed upon, which remains within the
framework of the limits of liability and warranty which are specified by this contract.
8.5

Advice for disposal / Options of reuse:

Please dispose of your machine in an environmentally friendly way, not by disposing of the
waste not in the environment, but by acting in a professional way.
Please do not simply throw away the packaging or the used machine later on, but dispose of
them according to the guidelines established by your city council/municipality or by the corre-
sponding waste management enterprise.
Version 1.0.1 dated 2015-12-17 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
MH25SV GB
Page 93