MOTO GUZZI Quota 1100 ES Handbuch Seite 52

RUNNING-IN
The recommendations below should be followed when
running-in:
Before riding, run the engine at low revs until it has
warmed up.
Do not exceed the rpm shown in the table; it is also
advisable to run the engine at varying speeds rather
than at a constant speed.
Before stopping reduce the speed gradually to avoid
subjecting components to sudden changes in tempera-
ture.
Remember that components need several thousand
kilometers before they are properly bedded in; care
taken in this period will ensure prolonged vehicle life.
BREAKING-IN RPM
Kilometers
From 0 to 1000
From 1000 to 2000
From 2000 to 4000
After the first 500÷1500 km
Change the engine oil.
Should the oil level drop to the minimum level before
the first 500÷1500 kilometers have been completed
then carry out a complete oil change rather than just
topping up. Recommended oil: «Agip 4T SUPER
RACING SAE 20W/50».
Replace gear lubrication oil.
Replace transmission box lubrication oil.
Check that all nuts and bolts are tight.
Check rocker clearance.
Check tyre pressures.
Max. RPM
5000
6000
Gradually increase rpm until maximum permissible is reached.
5 1