3.16 Loading And Transporting The Machine - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP

3.16 Loading and transporting the machine.

 Check the machine's loading dimensions.
 Check the transport vehicle's permissible axle loads, wheel loads and permissible total load.
 Take note of the dimensions and load bearing capacities of roads and bridges, as well as their overhead and side
clearances.
Risk of personal injury and damage to property
Failure to load and transport the machine properly can lead to injury and damage.




18 / 70
The machine must only be loaded and transported by qualified personnel and as specified
in the operating instructions. See "Personnel requirements".
Only load the machine on even and solid ground.
Only drive straight forwards when on the ramp and the transport vehicle.
Due to weight of the engine, the machine must always be reversed onto the transport
vehicle, as there is otherwise a risk it might slide off the ramp.
Safety
V1
EN