Operating instructions
PP
6.2
Maintenance plan
Regular maintenance operations
The separate operating manual for the engine (KUBOTA), the combination cooler (EMMEGI) and the crawler undercarriage (TFW) must also be
observed.
No.
1
Check the engine oil
2
Change the engine oil
3
Change the engine oil filter
4
Check the hydraulic fluid level, top up if required
5
Change the hydraulic fluid
6
Change the hydraulic fluid filter
7
Clean the air filter; if very dirty, replace
8
Change the fuel filter
9
Change the fuel prefilter
10
Check the fuel pipe and clamp
11
Check the battery acid level and oxidised connections
12
Check the v-belt tension
13
Check the cooler hose and clamp; replace if necessary
14
Replace the cooler hose and clamp
15
Check the cooling fins for dirt
16
Check the coolant level, top up if required
17
Change the coolant and antifreeze (approx. 4 l)
18
Check the antifreeze in the coolant (before every frost forecast)
19
Check the opening pressure of the cooler's lid
20
Check the nozzle opening pressure
21
Check the compression pressure
22
Remove deposits from the fuel tank
23
Check electrical cables for loose connections
24
Check the combustion pipe and clamp
25
Recharge the battery; replace if necessary
Check the hydraulic hoses for leaks (retighten connections)
26
27
Check the operating equipment and indicators
Check for damaged, deformed components and unusual noises
28
Retighten all screws and nuts, replace missing screw connections
29
30
Check the crawler chain tension, tighten if required
31
Lubricate as specified in the lubrication chart
32
Check load-bearing components for cracks
33
Adjust the valve clearance of the rocker arm (0.15 mm)
53 / 70
Maintenance and care
Maintenance work
Daily
First 50 h
and every
50 h
and every
50 h
and every
50 h
V1
Every
Every
Annually
200 h
1000 h
Every 2
years
EN