Herunterladen Inhalt Inhalt Diese Seite drucken

Adjusting The Adjustable Panels; Raising/Lowering The Smoothing Board - probst POWER PLAN PP Bedienungsanleitung

Screeding machine
Inhaltsverzeichnis

Werbung

Operating instructions
PP
5.5.9

Adjusting the adjustable panels

The adjustable panels are located on the left and right side of the machine.
5.5.10

Raising/lowering the smoothing board

45 / 70
Operating the machine
V1
1. Pull out the lock bolt (1) and
turn.
2.
Move the adjustable panel (2)
into the required position. A
detailed description of how the
adjustable panel can be adjusted
during operation can be found in
the separate operating tips, in the
section "Adjusting the adjustable
panels".
3. Keep turning the lock bolt (1)
until it audibly engages.
4. If necessary, continue turning the
lever (3) until the bottom lip of
the adjustable panel (2) is
parallel to the ground.
Raising the smoothing board
1. Move the lever (1) in the direction
of the arrow.
2. Continue pressing the toggle switch
(2) until the smoothing board has
been fully raised.
Lowering the smoothing board
Slowly move the lever (1) in the
direction opposite the arrow.
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis