Adjusting The Damper Speed For The Front Chute; Selecting The Drive Setting And Driving Mode - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
5.5.4

Adjusting the damper speed for the front chute

Depending on the operating method and operator's speed, the damper speed of the front chute can either be
increased or reduced.
5.5.5

Selecting the drive setting and driving mode

41 / 70
Operating the machine
V1
Throttle valve (1) = Raises the front
chute.
Throttle valve (2) = Lowers the front
chute.
Adjusting the Effect
damper speed
Setting
Turning it Reduces the
clockwise speed
Turning it Increases the
anticlockwise speed
1. Loosen the grub screw on the
throttle valve.
2. Turn it by ¼ turn into the relevant
direction.
3. Now actuate the front chute.
4. If necessary, readjust the damper
speed.
5. Tighten the grub screw.
Drive setting for screeding mode
Switch toggle switch (1) to 0 (max.
speed 1.6 km/h)
Drive setting for driving mode
Switch toggle switch (1) to I
(max. speed 3.2 km/h)
EN