Cleaning The Air Filter - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
5.3.5

Cleaning the air filter

Risk of damage to property
Failure to properly clean the air filter can lead to filter blockages and the creation
of highly flammable gasses.


34 / 70
Operating the machine
Do not wash the air filter, brush out the dirt or clean it with fuel.
When blowing the air filter out, makes sure that none of the dust finds its way into the
inside of the filter.
1. Park the machine on level ground.
2. Open the engine hood. See
"Opening the engine hood".
3. Carefully unscrew the cap (1) and
allow the excess pressure to
escape.
4. Carefully continue unscrewing the
cap (1) and remove.
If the coolant reaches up to the
bottom lip of the filler pipe, the
cooler contains sufficient cooler.
If the coolant needs to be
topped up:
5. Top up the coolant until it reaches
the bottom lip of the filler pipe. For
information on operating fluids and
filling capacities, see the separate
operating manual for the
combination cooler (EMMEGI).
6. Screw the cap (1) back on.
7. Close the engine hood
1. Open the engine hood. See
"Opening the engine hood".
2. Carefully open the clips (1) and
remove the cover (2).
3. Squeeze the dust outlet (3) and
check for caked up dust. If
necessary, clean.
V1
EN