probst POWER PLAN PP Bedienungsanleitung Seite 38

Operating instructions
PP
Battery control light
Coolant temperature indicator
38 / 70
Operating the machine
Risk of damage to property
Operating the machine with coolant that is too hot can lead to damage.
If the coolant temperature rises above +110 °C:
 Cleaning the air filter or replace if necessary,
 Blow clean the cooling fins with compressed air,
 Check the coolant level and top up coolant if required.
If none of the above works:
 Contact customer services.
The battery control light (1) must be
illuminated when the ignition switch is
set to I. See the section on "Starting
the engine".
When the engine is running, this control
light must extinguish. If it does not,
there is a fault.
During normal driving mode and if the
coolant level is within the specified
range, the coolant temperature
indicator (1) can go up to +110 °C.
V1
EN