Inhaltsverzeichnis
Werbung
Operating instructions
PP
5.5.6
Starting to drive
5.5.7
Chain guide
The chain guide acts as a point of reference for the operator when working with the machine.
It, for example, makes it easier to drive the machine closely along the sides of kerbstones and road kerbs (in
particular in corners).
The chain guide can be attached on the left or right side of the machine.
Risk of damage to property
While driving, there is risk that the protruding chain guide or the loose chain
collides with objects or that they get caught. This can lead to damage.
43 / 70
Operating the machine
Risk of accident
Lack of attention when starting to drive the machine in driving mode can lead to
accidents.
In the event of danger, warn people accordingly using hand signals.
It must be ensured that there are no people in the machine's hazard zone.
Only leave the chain guide extended during operation.
Take great care when driving the machine.
Clip the chain back into place, push it fully back in and secure it after operation.
Manual driving mode
1. Set the driving mode switch to 0 -
manual mode.
2. Start the engine. See "Starting the
engine".
3. Carefully move the joystick (1) into
the direction you want to drive.
Automatic driving mode
1. Set the driving mode switch to I –
automatic mode.
2. Start the engine. See "Starting the
engine".
3. Press the toggle switch on the
manual control unit to make slight
adjustments to the direction of
drive. See "Manual control unit".
V1
EN
Werbung
Kapitel
Inhaltsverzeichnis
