Accident Prevention; Hazard Zone - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
3.8

Accident prevention

As well as a the operating instructions, personnel must also observe the relevant applicable national regulations on,
e.g. the following topics:
 Occupational safety
 Accident prevention
 Health protection
 Environmental protection
Risk of personal injury and damage to property
Failure to observe these safety measures can lead to injury and damage.







3.9

Hazard zone

Risk of personal injury
Operating the machine incorrectly can lead to injury and death.

 The machine's hazard zone is defined as all of the areas in front, next to, behind and underneath the machine
that are outside the machine operator's field of vision, as well as the area around the machine in which the
machine could also reach other people as it moves.
 In the event of danger, people must be warned accordingly using hand signals.
 If a person fails to leave the hazard zone despite having been signalled that there is danger, stop the machine.
 Keep the machine at a sufficient distance from solid structures such as walls, scaffolding or other machines at all
sides to prevent creating crushing hazards.
If it is not possible to keep at a safe distance from such objects, fence off the work area.
 If working in areas that are difficult to keep in view, work with another person to guide you.
12 / 70
Fence off the work area to keep out unauthorized persons.
Protect the machine from access by unauthorized persons during breaks and after
finishing work as specified in the section on "Switching the machine off".
Only ever park the machine in a place where it will not be in the way, e.g. of other
construction site traffic.
Make sure the work area is adequately illuminated.
Do not use the machine during a thunderstorm.
Proceed with care when working with wet, slightly frozen or contaminated bedding
material.
Do not use the machine in temperatures below +3 °C (37.5 °F).
When operating the machine and while its engine is running, only the operator and no
more than one assistant are permitted inside the machine's hazard zone.
Safety
V1
EN