Operating instructions
PP
Tilt sensors
The tilt sensors are used for detecting heights when using the ultrasound and laser technology.
4.5
Training
The machine must only be operated and maintained by correspondingly trained and briefed personnel. For this
reason, personnel will be correspondingly trained and briefed when the machine is handed over. This training
includes:
Going through each page of the operating instructions and complementing this with practical exercises
performed on the machine.
Discussing the observance of the relevant national accident prevention regulations.
Explaining the use of the operating equipment.
Discussing the inspections that need to be performed before the engine is started.
Discussing the regulations for running-in the engine.
Discussing the operation of all of the machine's functions.
Explaining the maintenance intervals and the points listed on the maintenance and inspection plan on the
machine.
Discussing the lubrication intervals and lubrication points.
Handing over the separate operating manuals for the engine (KUBOTA), the combined cooler (EMMEGI) and the
crawler undercarriage (TFW), the MOBA control unit, the Rugby laser sender and the operating tips.
Explaining the warranty terms.
21 / 70
General information
V1
Fold open the measuring bar (1) by
pulling it in the direction of the arrow.
2
Tilt sensor
EN