Changing Fuses - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
6.5.8

Changing fuses

Risk of damage to property
Faulty fuses can cause damage to the electrical system.



63 / 70
Maintenance and care
Repair the fault that damaged the fuse.
Replace the fuse immediately and make sure that the new fuse has the right amps.
Do not repair or bypass fuses.
1. Open the engine hood. See
"Opening the engine hood".
2. Pull out the lock bolt (1) and turn.
3. Push the fuse box up (2).
4. Undo the screws (3) and remove
the cover (4).
5. Locate the broken fuse and replace.
Check the "Fuse assignment plan"
for fuse assignment information.
6. Push down the fuse box (2) and
Keep turning the lock bolt (1) until
it audibly engages.
7. Close the engine hood.
V1
EN