Starting The Engine - probst POWER PLAN PP Bedienungsanleitung

Operating instructions
PP
Operating hours indicator
5.5.2

Starting the engine

Risk of personal injury
Sudden machine movements can lead to injuries.

39 / 70
Operating the machine
Always make sure that there are no persons inside the machine's hazard zone before
starting the engine.
To observe the specified operating-hour
based maintenance intervals, they must
be regularly checked at the operating
hours indicator (1).
1. Switch the ignition switch (1) to
position I (ignition ON).
2. Check whether all of the indicator
lights are on.
3. Switch the ignition switch (1) to
position II and hold it there until
the pre-ignition indicator
extinguishes (after approx. 3
seconds).
4. Once the pre-ignition indicator has
extinguished, switch the ignition
switch (1) to position III and hold
it there until the engine starts.
V1
EN