4Wd Chassis Hunter / Streethunter 4 - Reely 4WD GP STREETHUNTER 4.1 Bedienungsanleitung

3 D
ESCRIPTION OF THE MODEL
3.2
4WD C
The versions Hunter and Streethunter essentially differ in their tyres and the design of the car body.
All operating and mounting instructions are therefore valid for both versions.
The image shows the work on the Hunter version.
2/4 WD
2/4 Wheel Drive driven by 2 or 4 wheels.
ABC assembly
ABC means "Aluminum", "Brass" and "Chrome". Aluminum with its small thermal expansion and small weight serves as
material for pistons, the cylinder is made of brass with chrome-plated contact surface.
Air filter
The air filter is made of foam and prevents the penetration of dust and dirt particles through the suction hole into the carbu-
rettor and in the engine.
Alignment
Position of the wheel level to the driving direction:
a) Toe-in – Wheels point inwards
b) Toe-out – Wheels point outward
Axle leg
This is where the axle turns. The steering levers are located on the front axle legs.
Bumper
Made of impact resistant synthetic material for excellent damping in case of a frontal crash.
Chassis
The "frame" of the vehicle, to be precise, only the bottom support plate.
© REELY 09/07
H / S
HASSIS UNTER
4.1
TREETHUNTER
a
�����������
b
������������
41