Echnical Ata - Reely 4WD GP STREETHUNTER 4.1 Bedienungsanleitung

8 T
ECHNICAL
E :
NGINE
4,1 ccm Combustion engine
with ABC assembly, two chamber resonance exhaust silencer and slide carburettor
Displacement:
Power:
Engine speed:
Speed range:
Bore:
Stroke:
Fuel:
Tank capacity:
Lubrication:
Air filter:
P
OWER TRANSMISSION
All-wheel drive:
Centrifugal clutch
Transmission ratio:
C :
HASSIS
C :
HASSIS FRAME
Front wheel suspension:
Rear wheel suspension:
Brake:
S :
USPENSION
M
EASURE AND WEIGHT
„Hunter / Streethunter 4.1 4.1" (dimensions excluding body)
Total length Wheel base
435 mm
© REELY 09/07
D
ATA
4,1 ccm
1,84 kW / 2,5 HP
30.000 rpm
2000 – 30.000 rpm
20,5 mm
18,02 mm
RC car model fuel on a methanol/oil basis
with a min. share of 5% - 25% nitromethane and 16% synthetic oil
125 ccm
self lubricating
foam – dry filter
:
via cardan shafts to front and rear axles
enclosed differential in the front and rear axle,
center differential
main pinion made of steel
All drive axes are supported by ball bearings.
Main pinion (46Z / clutch bell (14Z)
Support plate made of Duralumin, extremely light, firm and warp resistant
with lateral chassis lining strips
damper plates made of aluminum, CNC machining
reinforcing cross-ties from rear axle differential housing to the support plate
and from the cover of the center differential to the steering link bearing
Twin control arm suspension
Clamping screw in the upper transverse control arm
Twin control arm suspension
Clamping screw in the upper transverse control arm
(inclination front / rear adjustable)
Disk brakes with aluminum disks,
special brake pads at the rear axle drive and at the front axle drive
Spring struts with aluminum oil dampened shock absorbers,
spring preload via spring pretensionners, adjustable,
steering point adjustable
Width
317 mm 305 mm
Wheel track Height
245 mm
Weight with engine
(as in delivery)
170 mm 2590 g
63