Aractéristiques Techniques - Reely Rex-X Promo Rtr Bedienungsanleitung

ARACTÉRISTIQUES TECHNIQUES
7.1
R ' ,
ÉGLAGES D USINE DIMENSIONS
Largeur des tiges filetées visibles
Bras transversaux supérieurs arrière :
Bras transversaux supérieurs avant :
Barres d'accouplement :
Timonerie des gaz
(a) Distance tige de commande des gaz– bague d'arrêt:
(b) Distance bague d'arrêt – tête sphérique :
Timonerie de frein
(c) Distance suspension – bague d'arrêt :
(d) Distance bague d'arrêt – bague d'arrêt :
D
IMENSIONS ET POIDS
Longueur totale Empattement Largeur
470 mm 330 mm 312 mm
94
12,2 mm
8,5 mm
30,4 mm
11,8 mm
5,8 mm
a b
9,5 mm
36,7 mm
c d
Ecartement Poids avec moteur
des roues (correspondant
à la livraison)
268 mm ca. 3450 g
Notice d´utilisation 4WD Buggy Chassis Rex-X Promo réf. 23 30 00
2 M
ODELLBESCHREIBUNG
Totally off road!
You are looking for a challenge; you want to run your model on all types of terrains.
This type of vehicle allows you to drive on a wide variety of terrains as it offers numerous possibilities to adapt the chassis
in accordance with your own style of driving and you field of application. The raised chassis extensions made of shock
resistant synthetic material offer the RC components and the silencer additional protection against splash water, bouncing
stones and restarting in case of road unevenness. Semi pneumatic knobbed tires ensure correct driving even on "difficult"
terrains.
Transverse stabilizers at the front and at the back (available optionally) ensure excellent road holding also on slippery sur-
faces.
T
ECHNICAL INFORMATION
Engine:
4WD Buggy Rex-X Promo is driven by an air-cooled 3,5 ccm two stroke engine with 1,4 kW (1.9 PS).
Slide carburettor, manifold and resonance tube are already mounted.
The recoil starter cord that is flanged onto the crank case makes it possible to start the engine without other tools.
The engine is operated with environmentally-friendly model fuel based on oil/methanol, the tank with snap closing holds
125 ccm.
Drive:
The driving power of the 2 PS two stroke engine is transmitted to the enclosed center differential and from there to the
differential in the front and rear axle.
All differentials have metal bevel wheels and planet wheels, the axle drive shafts are supported by ball bearings.
Chassis frame:
The independent wheel suspension at the double transverse control arms as well as the aluminum oil dampened shock
absorbers which are adjustable with spacer rings optimize road-holding, thus fulfilling all expectations.
Two independent adjustable disk brakes with special brake pads offer a braking power at the front and rear axle that can be
adapted to driving style and terrain.
The adjustable servo saver protects the steering servo in hard terrains.
A transverse stabilizer (option part, not included) at the rear axle reduces the inclination of the model to understeer, which
makes driving behavior more agile.
Chassis
The ground support plate made of Duralumin and the reinforcing cross-ties of front axle to the center differential and of rear
axle differential to the chassis guarantee a high stability with small weight.
This stiffness ensures a good driving stability, since no suspension torque from the chassis is superposed to the selected
tuning of the undercarriage.
The drive performance benefits from the low net weight of the special aluminum alloy and the high stability of the model
means that it can withstand small collisions without damage.
The lateral chassis lining strips protect the components against falling stones.
Tuning
Clamping screws in the upper transverse control arms are used to adjust the camber inclination of the front and rear axles.
The the alignment is effected by clamping screws in the steering links.
Tuning parts are available on request. Hence, you can retrofit at any time according to your wishes.
M
EASURE AND WEIGHT
Total length Wheel base Width
470 mm 330 mm 312 mm
© REELY 09/06
Wheel track Weight with engine
(as in delivery)
268 mm approx. 3450 g
39