Agreements; Agreements And Intended Use; Service - Sartorius Stedim Biotech BIOSTAT RM 20 basic Bedienungsanleitung

7.5 Agreements

7.5.1 Agreements and
Intended Use

7.5.2 Service

56 Appendix
All components of the BIOSTAT
processes in a corresponding laboratory setting. If, for example, there are doubts
concerning the use of aggressive (corrosive) media together with the CultiBag or in
the respective laboratory setting, all components must undergo corrosion resistance
testing. Warranty agreements for all Sartorius Stedim Biotech products are geared
towards the General Terms and Conditions. Any deviations from this must be declared
in writing.
y The warranty covers design, manufacturing or material errors as well as their
resulting malfunctions.
– Defective material will be repaired or replaced.
y The agreements do not apply to disposables and other parts that undergo normal
wear (e. g. electrodes, o-rings, seals, filters).
The warranty becomes void:
y if there is any improper handling
of the bioreactor and its device parts, if they are used outside of their
specifications or the accompanying information is ignored
y if the bioreactor is set up under unsuitable environmental conditions, e. g. in the
presence of corrosive media
y if third-party components are used that are not approved for use by Sartorius
Stedim Biotech.
Defective devices cannot be repaired in the workshop of the customer himself.
Defective devices can be returned to Sartorius Stedim Biotech.
Repairs are carried out according to the maintenance conditions of Sartorius Stedim
Biotech. Please contact your Sartorius Stedim Biotech representative regarding device
returns.
The sender must prove compliance with the safety regulations.
A corresponding "Declaration of Decontamination and Cleaning of the Device"
(located in the appendix) must be filled out before return shipment (see also section
"7.6 Decontamination Declaration" on page 57).
t
® RM 20 | 50 basic are designed for biotechnological