This displays the versions, bag configuration and the connection status.
A successful connection is indicated by a green OK checkmark. The device auto-
matically switches to this page after a device restart. All commands, target values
and alarms are now managed via the DCU Tower.
When service is performed or calibration work is carried out on the rocker, this must
be carried out via the rocker display. To do this, press the "Choose controlmode"
button to return to Control selection (not possible via the DCU Tower due to the
amount of data involved).
This defines whether or not controllers for Speed, Temperarure1 and 2, Gasflow 1 and
2 and CO
are restarted automatically after the device is restarted.
2
Menu Operation
37