Sartorius Stedim Biotech BIOSTAT RM 20 basic Bedienungsanleitung Seite 33

Standard passwords factory setting:
User: SART02
Supervisor: SART01
There are 3 user levels.
1. Locked ... no system changes can be made.
Most menus are also locked.
2. User ... all parameters can be changed and all menus can be accessed except
for the PID parameter settings.
3. Supervisor ... all functions are released incl. the PID parameter settings.
The supervisor can also create new passwords for users and supervisors.
Calibration functions can only be access by service technicians.
Create new passwords:
This is used to assign a new password for the User level.
To enter a new password, press "Enter new password"
to open the entry page. You must re-enter the password in "Re-Enter new password"
to confirm.
Then press "Save new password" to apply it.
Pressing this button
switches from "User"
to "Supervisor."
Menu Operation 33