Biostat ® Rm 20|50 Basic; Connections, Interfaces - Sartorius Stedim Biotech BIOSTAT RM 20 basic Bedienungsanleitung

2.4 BIOSTAT ® RM 20|50 basic

2.4.1 Connections, Interfaces

20 Delivery and Installation Instructions
Fig. 1: Schematic representation of the back of the BIOSTAT RM
Fig. 2: Schematic representation of the left side of the BIOSTAT RM
Fig. 3: Schematic representation of the right side of the BIOSTAT RM
Key:
SIG 1: Reserve (LED connection or Loadcell)
D-link: Optional Ethernet
SIG 2: Alarm output, potential-free, max. 0.5 A
SIG 3: Reserve (weight measurement)
D-LINK 2: DCU/ MFCS connection D-SUB
D-LINK 3: Optional Profibus DP D-SUB
AIR: Compressed air connection max.1.5Bar | air pump intake
CO2: Gas connection max. 1.5 (possibly O2)
T6.3A: Main switch | Power connection,
100-240VDC broad band. Mains adapter, fuse 6.3A slow-acting
GAS1: Gas mixture outlet to RM bag
TEMP 1: PT100 temperature sensor connection
H 1: Heating panel 48V | 3.15A
FH 1: Filter heater 24V | 800mA
GAS 2: Gas mixture outlet to RM bag
TEMP 2: PT100 temperature sensor connection
H 2: Heating panel 48V | 3.15A
FH 2: Filter heater 24V | 800mA