Initialise Device; Session Id; Personal Id; Quick Menu Settings - Dräger X-am 7000 Technisches Handbuch

The Menu » Settings «
7.2.8

Initialise device

- This function can be used to reset all parameters of the instrument
to the default factory settings. The sensor data remain unchanged.
- Initialising the device does not affect the settings for the measuring
channels.
Select the menu items » Settings \ Instrument \ Init. Device « in

this order, pressing the »
Select » Confirm « and press the »

instrument to the factory settings.
7.2.9

Session ID

- This function is used to mark a measuring point or a measuring period
in the daily profile memory with a 12-character session identifier.
Select the menu items » Settings \ Instrument \ Session ID « in

this order, pressing the »
Select the line for the input of the session ID and press the »

key to switch to edit mode.
Set each position of the ID to the desired value with the »

» « keys and confirm each position by pressing the »
M
When you have entered the entire session ID, press the »

key to confirm your input.
- The entered session ID is now stored on the data logger.
7.2.10

Personal ID

- This function is used if you want to enter a 12-character personal
identifier in the daily profile memory (used only for identification of
the instrument as belonging to a specific person).
Select the menu items » Settings \ Instrument \ Personal ID « in

this order, pressing the »
Select the line for the input of the ID and press the »

switch to edit mode.
62
« key after each selection.
OK
« key to reset the
OK
« key after each selection.
OK
« key after each selection.
OK
OK
Set each position of the ID to the desired value with the »

and » « keys and confirm each position of the ID by pressing
M
the » « key.
OK
After input of the complete identifier, confirm your input with

the » « key.
OK
7.2.11

Quick menu settings

- This function is used to activate/deactivate functions for the
quick menu.
Select the menu items » Settings \ Instrument \ Set Quickmenu «

in this order, pressing the »
Select the functions you want to have in the quick menu and mark

each one by pressing the »
«
OK
7.2.12

Password Info

« and
- This function is used to change the password for the menu » Info «.
« key.
Default setting:
OK
«
Password for the menu » Info «:
OK
Select the menu items » Settings \ Instrument \ Password Info «

in this order, pressing the »
Select the line for the input of the password and press the »

key to switch to edit mode.
Use the »

password, confirming each position with the »
After input of the complete password, confirm your input with

« key to
the » « key.
OK
« key after each selection.
OK
« key. Selection: see page 50.
OK
0 0 0 0
« key after each selection.
OK
« and » « keys to set each position of the
M
«
«
OK
« key.
OK
Dräger X-am 7000