Device Status (Diag_Status) - Dräger Polytron 6100 EC WL Gebrauchsanweisung

Quality Substatus
Bits 6 and 7 Bits 2 to 4
0 5
0 6
0 7
1 0
1 1
1 2
1 3
1 4
1 5
1 6
2 0
11.2

Device status (DIAG_STATUS)

Meaning of "Allgemeiner Status" as per NAMUR NE107:
F: Failure
Instructions for use |
Dräger Polytron
PV Cause
NaN No communication with device.
NaN No communication with device.
NaN Warm-up phase 1 active.
Maintenance mode active.
Gas reading – (Bit not used)
Gas reading – (Bit not used)
Gas reading – (Bit not used)
Gas reading – (Bit not used)
Gas reading Calibration interval expired.
Device is operated outside the specified tempera-
ture range.
Gas reading Gas reading outside the measuring range.
Gas reading – (Bit not used)
Gas reading – (No warning, no error)
®
6100 EC WL, Dräger Polytron
Remedy
A Check ISA100 Wireless
B Check ISA100 Wireless
C Check data for integration into
ISA100 Wireless
A Check ISA100 Wireless
B Check ISA100 Wireless
C Check data for integration into
ISA100 Wireless
Wait for warm-up phase 1 to finish.
Exit maintenance mode.
–
–
–
–
Calibrate the device.
Use weather protection kit (accessory) when
exposed to sunlight.
A Calibrate the device.
B Change the sensor.
–
–
®
Repeater ISA
| en
Troubleshooting
™
receipt.
™
network settings.
™
network.
™
receipt.
™
network settings.
™
network.
47