The » Quick menu «
3.3
Menu navigation
Graphical symbols (icons) simplify the navigation through the various
menus:
Together with the text » Back «, » Menu «, etc.
-
Exit from the menu or return to previous menu.
Closed folder
-
This item contains further functions or sub-menus.
Open folder
-
The functions and sub-menus shown here are contained in
this item.
Function
-
If activated, functions can be executed in a single step or
several steps.
Selection activated
-
For functions which can be selected and activated, activation
can be done by pressing the »
Top of list displayed
-
There are no further functions, menus or sub-menus above
those currently displayed.
List can be scrolled up
-
There are further functions, menus or sub-menus above those
currently displayed.
End of list displayed
-
There are no further functions, menus or sub-menus below
those currently displayed.
List can be scrolled down
-
There are further functions, menus or sub-menus below those
currently displayed.
Next
-
Execute the related action.
50
« key.
OK
Number of current screen / total number of screens within the
3/3
function.
2/2
-
Data input with the »
4
The » Quick menu «
The functions of the Quick menu can be selected only if they have
been activated.
To activate or deactivate functions, open the menu » Settings « and
select the function » Set Quickmenu «, see page 62.
The functions marked with "
instrument leaves the factory (the activated functions may vary
according to the country where the instrument is to be used).
4.1
Functions which can be activated
Description
PID Info
Display the current PID sensor
configuration.
*
Show Notice
Displays notices in plain text page 52
*
Show Fault
Display faults in plain text
Bumptest
Start bump test function
Show Battery
Display battery data, including
the remaining battery time
« and »
« keys.
M
*
" are activated by default when the
see:
page 65
page 52
page 81
page 52
Dräger X-am 7000