Password For Calibration Menu; Password For Settings Menu; Switch Off Lock; Telemetry - Dräger X-am 7000 Technisches Handbuch

7.2.13

Password for calibration menu

- This function can be used to change the password for the menu
» Calibration «.
Default setting:
Password for the menu » Calibration «:
Select the menu items » Settings \ Instrument \ Password maintain «

in this order, pressing the »
Select the line for the input of the password and press the »

key to switch to edit mode.
Use the » « and »

M
password, confirming each position with the »
After input of the complete password, confirm your input with

the » « key.
OK
7.2.14

Password for settings menu

- This function can be used to change the password for the menu
» Settings «.
Default setting:
Password for the menu » Settings «:
Select the menu items » Settings \ Instrument \ Password config. «

in this order, pressing the »
Select the line for the input of the password and press the »

key to switch to edit mode.
Use the » « and »

M
password, confirming each position with the »
After input of the complete password, confirm your input with

the » « key.
OK
7.2.15

Switch off lock

- This function can be used to prevent the instrument from being
switched off.
Dräger X-am 7000
0 0 0 1
« key after each selection.
OK
« keys to set each position of the
« key.
OK
0 0 0 2
« key after each selection.
OK
« keys to set each position of the
« key.
OK
Select the menu items » Settings \ Instrument \ Switch off lock « in

this order, pressing the »
Select the desired status » Disable « or » Enable for A2 « or

» Enable « and press the »
- If the status » Disable « is active, the instrument can be switched off.
- If the status » Enable for A2 « is active, the instrument can be
switched off unless an A2 alarm is active.
- If the status » Enable « is active, the instrument cannot be
«
switched off in any circumstances.
OK
7.2.16

Telemetry

- This function is used to switch the instrument to telemetry mode
(communication with external devices such as the radio module).
Select the menu items » Settings \ Instrument \ Telemetry « in this

order, pressing the »
Select the desired status » Enable « or » Disable « and press the

» « key to activate it.
OK
If the status » Enable « is active, the instrument is in telemetry mode.
The icon » PC « appears on the display.
7.2.17

Pump

- This function is used to activate or deactivate pumped mode when
the adapter for pumped mode is fitted (applies only to instruments
«
with an integrated pump).
OK
Select the menu items » Settings \ Instrument \ Pump « in this

order, pressing the »
Select the desired status » Enable « or » Disable « and press the

» « key to activate it.
OK
- If the status » Disable « is active and the adapter for pumped
mode is fitted, the pump is switched off.
The Menu » Settings «
« key after each selection.
OK
« key to activate it.
OK
« key after each selection.
OK
« key after each selection.
OK
63