Clr Exposition; Clear Min/Max; Key Beep; Display Contrast - Dräger X-am 7000 Technisches Handbuch

The Menu » Settings «
CAUTION
!
Because the pump adapter is in use, it is impossible to measure
in these conditions!
- If the status » Enable « is active, pumped mode is activated
whenever the adapter for pumped mode is fitted.
7.2.18

Clr Exposition

- This function is used to reset peak values, short-term values and
shift-average values.
Select the menu items » Settings \ Instrument \ Clr Exposition «

in this order, pressing the »
Confirm the deletion of the peak values, short-term values and

shift-average values using the »
7.2.19

Clear Min/Max

- If the peak values need to be reset.
Select the menu items » Settings \ Instrument \ Clear Min/Max «

in this order, pressing the »
Confirm the deletion of the peak values using the »

7.2.20

Key beep

- This function is used to activate the key beep.
Select the menu items » Settings \ Instrument \ Key beep « in this

order, pressing the » « key after each selection.
OK
Select the desired status » Enable « or » Disable « and press

the » « key to activate it.
OK
- If the status » Enable « is active, each press of a key on the
instrument is confirmed with a short audible tone (beep).
64
« key after each selection.
OK
« key.
OK
« key after each selection.
OK
« key.
OK
7.2.21

Display contrast

- This function is used to adjust the contrast of the display.
Select the menu items » Settings \ Instrument \ Display contrast «

in this order, pressing the »
Use the » « and »

M
The adjustments are immediately visible on the display.
Adjustable range: 0 to 63
7.2.22

Restart System

- Restart of the whole system. Warm-up of all sensors.
7.2.23

Language

- This function is used to select the language for the instrument and
all displays.
Select the menu items » Settings \ Instrument \ Language « in this

order, pressing the » « key after each selection.
OK
Select the desired language from the list and press the »

to activate it.
NOTICE
i i
It is possible to switch to a language with some potentially
incomprehensible characters. This will make further use of
the menus very difficult or even impossible.
« key after each selection.
OK
« keys to adjust the contrast.
Dräger X-am 7000
« key
OK