Select Status; Initialise Channel; Sub-Menu » Hygiene; Overview - Dräger X-am 7000 Technisches Handbuch

7.3.11

Select status

- This function can be used to make one of several (1 to 5) records
for each sensor available for activation.
Select the menu items » Settings \ Sensors \ CA–CH4 \ Cfg.

records \ Select status « in this order, pressing the »
after each selection.
Select one or more desired records from the list and press

the » « key to activate it (»
OK
7.3.12

Initialise channel

- This function can be used to reset all parameters of a selected
sensors to the factory settings.
Select the menu items » Settings \ Sensors \ CA–CH4 \

Basic init. Ch « in this order, pressing the »
selection.
Select » Confirm « and press the »

initialisation of the corresponding channel.
7.4 Sub-menu » Hygiene «
The sub-menu » Hygiene « contains the functions for making various
settings for the installed sensors.
Dräger X-am 7000
« key
OK
«).
« key after each
OK
« key to execute a basic
OK
7.4.1

Overview

Hygiene
|

Cfg Datalogger

|

Clr Exposition

page 70
|
Shift Duration page 71
|
Exposure Status
a) The sensors shown in this overview serve only as examples and may differ
from the actual sensors installed in the instrument.
7.4.2

Configuration of the data logger

- This group of functions is used to configure the data logger.
The Menu » Settings «
Cfg Datalogger page 69
|
Datalogg. On/Off page 70
|
Peak/Average page 70
|
Sample Time page 70
|
Stack/Roll page 70
Exposure Status page 71
|
a)
CA–CH4
|
1)
IR–CO2
|
1)
EC–NO2
|
1)
EC–H2S
|
1)
EC–O2
69