Data Logger On/Off; Peak/Average; Sample Time; Roll - Dräger X-am 7000 Technisches Handbuch

The Menu » Settings «
7.4.3

– Data logger on/off

- This group of functions is used to configure the data logger.
Select the menu items » Settings \ Hygiene \ Cfg Datalogger «

and » Datalogg. On/Off « in this order, pressing the »
after each selection.
Select the desired status » Enable « or » Disable « and press

the » « key to activate it.
OK
7.4.4

– Peak/Average

- This function is used to select whether the peak value or the
average value is to be saved.
Select the menu items » Settings \ Hygiene \ Cfg Datalogger \

Peak/Average « in this order, pressing the »
selection.
Select the desired status » Peak « or » Average « and press

the » « key to activate it.
OK
Peak value:
- The peak value (the maximum measured value for gases such as
CO, H S, ... or the minimum measured value for gases such as O
2
during the sampling period is saved.
Average value:
- The average of all values measured during the sampling period
is saved
7.4.5

– Sample time

- This function can be used to set the sample time for the data logger.
Select the menu items » Settings \ Hygiene \ Cfg Datalogger \

Sample time « in this order, pressing the »
selection.
70
Select the sampling period from the list and press the »

to activate it (»
7.4.6
« key
OK
- Use this function to enter the behaviour of the data logger.
Select the menu items » Settings \ Hygiene \ Cfg Datalogger \

Roll « in this order, pressing the »
Select the desired status » Roll « or » Stack « and press the

»

Roll:

- When the data logger becomes full, in Roll the oldest values are
overwritten.
« key after each
OK
Stack:
- When the data logger becomes full, no further data can be saved.
- When the data logger is 90 % full, a warning icon »
7.4.7
- This function can be used to clear the exposure-evaluation memory.
)
2
Select the menu items » Settings \ Hygiene \ Clear exposition « in

this order, pressing the »
Select » Confirm « and press the »

exposure-evaluation memory.
« key after each
OK
«).
– Roll
« key to activate it (» «).
OK

Clear exposure values

« key after each selection.
OK
« key
OK
« key after each selection.
OK
« is displayed.
« key to clear the
OK
Dräger X-am 7000