Renkforce 1582598 Bedienungsanleitung Seite 95

Example 1: Activate output #1 for 10 seconds
(a) (b)
(a) Programming code for output #1
(b) Duration "10" = Activates the output for 10 seconds when a valid user code (or visitor code)
is entered.
(c) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Example 2: Activate output #2 for 7 seconds
(a) (b) (c)
(a) Programming code for output #2
(b) Duration "7" = Activates the output for 7 seconds when a valid user code (or visitor code) is
entered.
(c) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Example 3: Activate output #3 for 240 seconds
(a) (b)
(a) Programming code for output #3
(b) Duration "240" = Activates the output for 240 seconds (4 mins) when a valid user code (or
visitor code) is entered.
(c) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
(c)
(c)
95