Renkforce 1582598 Bedienungsanleitung Seite 93

Example 1: Single-use visitor code
Output #1 will be activated when the valid code is entered. The code can only be used once.
This means that the visitor can only access the premises once.
(a) (b)
(a) Programming code for visitor code
(b) Memory slot number = 0 (choose from 0 - 9)
(c) "00" indicates a single-use code
(d) Visitor code = 1268
(e) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Example 2: Visitor code with a time limit:
The visitor code is valid for a specified duration (01 - 99 hours). After this period, the code
automatically becomes invalid.
During the specified period, the visitor can activate output #1 like a standard user.
(a) (b)
(a) Programming code for visitor code
(b) Memory slot number = 2 (choose from 0 - 9)
(c) Time limit 03 = Code is valid for three hours (choose from 01 - 99 hours)
(d) Visitor code = 1378
(e) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Deleting visitor codes:
(a) (b) (c)
(a) Programming code for visitor code
(b) Memory slot number = 2 (choose from 0 - 9)
(c) Deletes the code (the lock will beep twice and the "MAINS" will flash two times)
(c) (d)
(c) (d)
(e)
(e)
93