Renkforce 1582598 Bedienungsanleitung Seite 114

Step 4: Create three different user codes for output #1
Enter the following key combination:
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 00 (choose from 00 - 99)
(c) User code = 1111
(d) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 01 (choose from 00 - 99)
(c) User code = 2222
(d) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
(a) (b)
(a) Output #1 should be activated
(b) Memory slot number = 02 (choose from 00 - 99)
(c) User code = 3333
(d) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Step 5: Activate output #1 for 3 seconds
(a) (b) (c)
(a) Start programming for output #1
(b) Duration "3" = Activates the output for 3 seconds when a valid user code (or visitor code) is
entered.
(c) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
114
(c) (d)
(c) (d)
(c) (d)