Renkforce 1582598 Bedienungsanleitung Seite 115

Step 6: Create a user code for output #2
Enter the following key combination:
(a) (b) (c) (d)
(a) Output #2 should be activated
(b) Memory slot number = 0 (choose from 0 - 9)
(c) User code = 5555
(d) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Step 7: Activate output #2 for 15 seconds
(a) (b) (c)
(a) Start programming for output #2
(b) Duration "15" = Activates the output for 15 seconds when a valid user code (or visitor code)
is entered.
(c) Saves the code (the lock will beep twice and the "MAINS" LED will flash two times)
Step 8: Exit programming mode
• Briefly press the key.
• T he code lock will beep twice and the "MAINS" LED will flash. The code lock is now in normal
mode.
115