Control Elements - Dometic DSP1312T, DSP1324T, DSP1812T, DSP1824T, DSP2312T, DSP2324T, DSP3512T, DSP3524T Bedienungsanleitung

SinePower
The inverter can be switched to an energy-saving mode to prevent the connected
battery from discharging too quickly.
The inverter can be turned on or off using the remote control (accessory).
Additionally, the inverter can be controlled using the energy monitor (accessory).
7.1

Control elements

No. in
Description
fig. 2
1 Main switch
2 Status LED
3 Fuse
4 Dip switch
EN
Description
0: Switches the device permanently off
I: Switches the device permanently on
II: The device can be switched on or off via a
remote control (accessory)
See chapter "Status indications" on page 17
Protects the inverter from overload.
The fuse can be pressed in again once it has
triggered.
Makes settings on the inverter
See chapter "Configuring the inverter" on
page 18
Technical description
11