look P24 Bedienungsanleitung Seite 27

IMPORTANT INFORMATION
Before using, read all of these instructions carefully.
Follow all the provided recommendations to fully
enjoy the benefits of this high-quality product.
We recommend that you have the assembly done
by an authorized LOOK retailer.
LOOK reserves the right to change the product
specifications without prior notice in order to
improve it.
LOOK products are protected by industrial
property rights. For more information, visit:
www.lookcycle.com/patents
WARNING: LOOK products are designed
!
and optimized for use by cyclists weighing
no more than 100 kg (220.5 lbs).
WARNING ABOUT
COUNTERFEIT PRODUCTS: The use of
counterfeit products is very dangerous and
may cause serious falls, resulting in significant
injuries or even fatalities to you or others.
For more information, please visit our website
at www.lookcycle.com under the WARRANTY
POLICY \ COUNTERFEIT section.
For more information on IMPORTANT
INFORMATION to be followed, please visit
our website at www.lookcycle.com under
the WARRANTY POLICY \ IMPORTANT
INFORMATION section.
If you are unable to consult our website, we
can provide our warranty policies in paper form
through your retailer.
Your frame has been crafted according to the
specifications of the LOOK design office.
Your frame comes assembled with its ZED crankset
specially developed for track use, its offset fork, a
carbon track stem, and an aero carbon handlebar.
The frame also comes with its specific seat post
and seatmast to hold the saddle in place.
Your LOOK P24 frame is compatible with both
standard axle and thru-axle wheels, front and rear.
FORK AND STEM INSTALLATION
Your LOOK P24 has been delivered with a transport
interface that should be removed to assemble the
bike in its final configuration. For this assembly of
the bike's steering section, it will be necessary to
use the stem provided separately.
For the assembly, disassembly, and/or maintenance
of your bike, please refer to the assembly diagram
below to correctly position all the parts that make
up the headset.
INTRODUCTION