Werbung
Verfügbare Sprachen
Verfügbare Sprachen
› Non-compliance with this manual
› Use of unauthorized spare parts
› Any modifications of the printer
› Incorrectly configured, faulty or unsuitable slicing software
1.2. Specifications
Manufacturer
Dimensions [X:Y:Z]
Layer Resolution
Build Volume Single
Extrusion [X:Y:Z]
Position repeatability ±0.1 mm / ±3.93 mil
Heating time
Print Bed Temp.
Filament Diameter
Environmental
humidity
AC Input
Materials
Connectivity
Wear Parts
› Print bed tape (Kapton®, adhesive tape covering the print bed)
› STUDIO Dual Extruder
› Hotend
BigRep GmbH
Berlin / Germany
1 7 15 x 1 1 70 x 1 7 65 mm /
67.5 x 46 x 69.5 in
Min. 100 µm / 3.9 mil
Max. 400 µm / 15.7 mil
1 0 00 x 500 x 500 mm /
39.5 x 19.5 x 19.5 in
80 ° C in 15 min
Max. 100 °C / 212 ° F
2.85 mm / 112 mil
40-60 %
(non-condensing)
208-240V, 16A, 50/60 Hz Power Consumption 3 2 00 W
ASA, ABS, BVOH, PLA,
PLX, PA6/66, HI-TEMP,
PET-CF, PETG, PRO HT,
PVA, TPU and more
LAN, USB
Model
Version
Weight Printer
(without packaging)
Extruder
Nozzle
Print Surface
Heating Strategy
Extruder Temp.
Printing Technology FFF
Ambient Operating
Temperature
Monitoring
Certification
Introduction
1.
BigRep STUDIO
STUDIO.2
550 kg /
1 2 13 lbs
Dual Fiber Extruder
Tool Steel Nozzle
0.6 mm
Kapton® (Polyimid)
Heated print
surface
Max. 280 °C / 536 °F
+15 °C ...+28 °C /
+59 °F ...+82 °F
Out of filament
sensor,
open door sensor,
webcam
CE
7
Werbung
