Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and Control
7.
7.3. Operating the BigRep STUDIO
Safety
WARNING – Danger of Crushing
Danger of pulling in fingers or loose clothing when manually moving the axes. Do
not reach into the build chamber while the machine is running!
Wherever possible, the protective covers – door and service hatch – must be in
place before manual movement of the axes.
By using the wrong G-code, it is possible that the hot nozzle moves into the print
and causes a fire hazard. Printing must not be performed without supervision!
Do not use G-code from unknown sources without prior checking of the code with
e.g. a visualization.
Before Printing
Preparation
› Ensure trouble free operation. & Chap. 2.5 Operator Obligations
Make sure that the printer is free of parts and not accessible to unautho-
rized persons before starting the printing process.
› Clean nozzles if necessary.
› Clean the print bed surface & Chap. 9 Maintenance
› Apply glue if necessary.
› After the printer has stopped for more than 3 hours, cut or extrude the uncov-
ered filament from the filament chamber to the extruder.
Turning the Machine On
› Check if the emergency stop button is unlocked. & Chap. 2.4 Emergency Stop
› Make sure that the extruder is connected to the electrical connectors. (see Fig.
8-4)
› Turn on the main switch.
› Press the reset button.
› Wait for the User Interface to open.
› Log in if necessary. Check the Remember Me box to remain logged in
› Connect if necessary. Click on Connect button, in drop down menu on the top
right corner of the screen and confirm.
36
Werbung
