Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and Control
7.
After restarting the machine, the following message will appear:
Choose one option:
Resume Print: Printer will start a resuming procedure.
› It will reset the temperatures of the bed and extruder.
› It will start the Home-To-Max procedure to identify its position:
‒ The extruders will move up to the highest Z position (Z m ax), then home X
and Y.
‒ The printer will automatically move back down again to 10 m m above the
stopped location to heat the nozzle and prepare to print.
After this procedure
› Go to the Temperature Menu and check that the bed and the extruders have
reached their correct temperatures.
› It is recommended to extrude 100 m m to verify material quality and flow
› Click on the Start Print button to resume the print.
Cancel Print: The UI will go to the standard menu, and the print will not be recov-
ered.
40
Fig. 7-10: Resume Print
Werbung
