Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and Control
7.
› Calibrate the flowrate multipliers if necessary.
& Chap. 7.2 Preparing the Printer / Base Flowrate Multiplier
› Assure that the distances between nozzles and bed are correct.
& Chap. 7.2 Preparing the Printer / Setting the Extruder Z Offsets
› Close the printer door.
› Go to the Control Menu and extrude 100 mm of material.
› In the Control Menu click on Home All.
› Go to the Print Menu and click on the Start Print button of the G-code to be
printed.
› Please ensure that the printing process starts correctly.
Removing the Printed Object
WARNING – Danger of Falling Parts
Large prints can be very heavy. Wear safety shoes with toe-protection.
Removing the printed object before the bed has cooled down bears the
risk of irreversible damage to the object's shape!
While removing the print there is a cutting hazard. Avoid using sharp tools.
› Once the printed object is completed, the extruder moves to its wait position
and the print can be removed after the bed has cooled down.
› Wait for the print bed to cool down to room temperature before removing the
print.
› Carefully remove the object from the print bed, use the delivered scraper if nec-
essary. Avoid using sharp tools.
Removing the Filament
› Heat the required hotend to the printing temperature of the material in use.
› Unload filament. Go to the Temperature Menu and press Unload.
› If the spool still contains filament, wrap it up and secure the loose end to avoid
entanglements.
› Save the filament in a closed storage space, free of dust and humidity.
Turning Off the Printer
Turn off when the printer is not used for a long time.
› Close BigRep Controls, click on Home > Logout > Shutdown.
› Turn off the machine using the main switch.
38
Werbung
