Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
9.
9.
Maintenance
9.1. Cleaning
Print Bed Surface
Make sure that the main switch is turned off!
Clean the print bed with a damp, soft, and lint-free piece of cloth before printing. Do
not use any solvent-based detergents!
Do not use any scratchy tools/materials for cleaning. Damages in the surface
can lead to faulty print results.
Ensure sufficient ventilation after cleaning the build surface. Use the cleaning agent
sparingly. Do not clean the build surface when heated. The extruder nozzles must
also be cooled before cleaning the build surface. All necessary instructions for use
in explosive atmospheres apply.
WARNING – Electrostatic Discharge
While cleaning the build surface, there is a risk of electrostatic charges.
Use ethyl alcohol to remove heavy soiling. Provide adequate ventilation when us-
ing ethyl alcohol. Keep away from heat, hot surfaces, sparks, open flames and oth-
er sources of ignition. Do not smoke at working space.
Extruder and Nozzles
Fine filament threads can occur during the printing process and should be removed
after. These threads can also get caught in the hotend ventilation. Regularly check
the ventilation and clean if necessary.
To clean mechanical parts from dust, spray components with compressed air.
Display
Clean the display with a damp, lint-free piece of cloth. Do not use solvent-based
detergents!
Printer interior
Make sure that the main switch is turned off! Clean the interior space if necessary.
Open the service hatch to remove remaining filament from interior.
Housing
Clean the acrylic glass panels of the enclosure with a damp, lint-free cloth. In the
case of heavy soiling, benzene-free petroleum, isopropanol alcohol or anti-static
plastic cleaner can be used.
Do not rub dry to prevent electrostatic charging. Do not use abrasive cleaners.
50
Werbung
