Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.4. Safety Devices
DANGER – Moving and Rotating Parts
Never attempt to bypass or override the safety devices! Moving or rotating parts
lead to serious injuries or death!
Emergency Stop In Case Of Emergency (see Fig. 2-1)
In order to bring all moving parts to a stop in an emergency, press the emergency
stop button on the control panel or on the backside.
DANGER
Emergency stop activation does not turn off the power supply. To turn off the
power supply, always set the main switch to OFF.
Check the emergency stop buttons regularly, at least once a month, to make sure
they are fully functional.
Restarting After an Emergency Stop
Ensure the printer's operational readiness and particularly make sure that there are
no potential hazards for people.
To start the machine after an activated emergency stop, make sure all doors are
closed. Unlock the emergency stop button by pulling it out. Then press Reset.
After an emergency stop and reset, the previous print may not be resumed.
WARNING - Risk Of Burns
Some parts may be very hot. Danger of burns! Do not touch any parts that are
marked with a warning label Hot Surface (
Emergency Stop Buttons
Reset
Safety
Doors
Main Switch
Fig. 2-1: Safety Devices
&
Chap. 2.1).
Safety
2.
11
Werbung
