Stihl iMOW 6.0 Gebrauchsanleitung Seite 83

13 Closing Bluetooth® Radio Interface
► If the "Access functions" have been activated
®
in the "MY iMOW " app: Deactivate "Access
functions".
Press the following key combination one after the
other:
► Press STOP (3).
The robot mower is stopped and locked
► Press and hold STOP (3) until the light
strip (4) fully lights up red.
► Press STOP (3).
The light strip (4) flashes twice. The device
lock of the robot mower is activated.
► Press and hold STOP (3) until the light
strip (4) fully lights up red and finally flashes
red twice.
"Energy efficient charging" mode is activated.
The robot mower's battery is fully charged. All
extra functions are deactivated.
After charging is complete, the robot mower must
be activated so that it is operational again:
► Press START (5).
The robotic mower is operational.
13 Closing Bluetooth® Radio
Interface
13.1
Setting up the Bluetooth
interface
The robotic mower regularly emits a Bluetooth
signal in order to be able to connect with a
mobile device.
To be able to use the robotic mower, the Blue‐
®
tooth radio interface must be secured via the
®
"MY iMOW " app with a password.
► Download the MY iMOW
store of your mobile device and create an
account.
► Add the robotic mower to the account.
► Follow the instructions on the screen and
secure the Bluetooth
password.
0458-011-9801-A
4
3
radio
®
®
app from the app
®
radio interface with a
After the password is assigned, the mobile
device is authorized to control and configure
the robot mower.
An additional mobile device can only be author‐
5
ized by entering the selected password. In this
way, the robotic mower is secured against unau‐
thorized access.
14 Light patterns on the robot
mower and charging sta‐
tion
14.1 Light strips on the robotic
mower
The light strips (1 and 2) indicate the status of
the robotic mower and errors.
The front light strip (1) is only active during a
change in status and lights up for 20 seconds.
White light pattern:
®
– No active mowing job.
Green light pattern:
– Mowing job is active.
– The rear light strip (2) shows the progress of
the mowing job.
Red light pattern:
– Device lock is active.
– Error message.
Blue light pattern – on rear light strip (2):
– The robotic mower is receiving a system
update.
If the ambient animation is activated via the
MY iMOW
nently lights up white when the robotic mower
1
2
®
app, the front light strip (1) perma‐
English
83